← Feed

Posts

• View post

  well, seems like I can still drive this model printer pretty good, print came out looking nice, my technique for getting the plate off and scraped off into the wash tank still works without making a mess, and the stainless workbench I got is working nicely too. One thing I’m annoyed about is I forgot to get a glass jar to do wet cures in. Guess I’ll have to let these parts air dry (which should be easy since I’m using IPA instead of detergent now), then do a traditional cure. Definitely want to...

• View post

  I think I definitely need to put a cheap stereo system under the house though

• View post

  vidya game being busted probably isn’t the worst thing in the world (haven’t decided whether I’ll chase a refund or not), gives me more motivation to do things away from the pooter, or, do things on the pooter that support my off pooter activities. Need to finish up those thunderhawks tonight and get them printing I reckon.

• View post

  dropped my exposure time from 2.1 to 2s but slightly bumped up some of the other wait times and the problem I now have is it's very hard to make out the slight release 'bounce' that the plate does from the webcam, overall that's probably good as it means less pulling forces on the print potentially stretching and warping them, but it does make it hard to tell visually whether I have adhesion or not

• View post

  Ninetyyyyyyy on the dot.

• View post

  I need to find some better frozen pies, the stuff coles and the local iga carry have gotten a bit meh

• View post

  uuuuuughh i am sore and tired. stayed up too late last night and was racking things today

• View post

  hmm, bluetooth audio seems fixed in kubuntu 26.04 as well. I was pleased my mouse was working properly but audio on top of it is a nice improvement.

• View post

  sigh, I need to buy more clothes. Shit I literally bought like a few months ago that was tight on me is now getting loose. My undies are all wayy too big now as well 😭

• View post

  I might go with HAP’s instead of cap’s simply because they have a built in switch, which might be useful in future if I run a single Ethernet back under the house to where the 3d printers are gonna live, or I can just bridge over the wifi since it’s all gonna be modern AC stuff anyway and there should be decent enough SNR to run wide channels and 5ghz to get good bandwidth

• View post

  annnnd ordered the IPA and a spare empty 5L bottle, I'll need to get a decent sized funnel locally to transfer the dirty IPA from the wash station to the spare bottle though

• View post

  well i've done most of the capsman configuration, though I really need to create a new vlan to use for capsman provisioning but ehhhhhhhh its a whole ass thing to setup a new vlan on the piece of shit dell switch and then trunk it through to the proxmox cluster and then reconfigure my chr vm with another interface and probably the most egregious thing of all of it is I need to make my mind up what vlanid to actually use

• View post

  Went for a long scooter ride through the city and all I took photos of was the bisexual lighting bridge

• View post

  stainless workbench is setup downstairs and the resin printer and the wash/cure station are setup down there as well. Cant do much with it til next week when the resin and the IPA etc. all rock up but it's nice to start to turn that downstairs area into a working area. I think though I need to get a decent sized industrial fan to keep dust from settling (I've got a little mini greenhouse tent over it for the time being), and I should probably get a small leaf blower/vac so I can keep the...

• View post

  WFH day this morning, making a choccy croissant in the air fryer while fixing my breakfast cereal was nice, I've got a little bit of a view out into wooloongabba from my kitchen window, though most of it is blocked by the giant shed they've built covering the new train station building site. A nice morning. Now I sit and drink my can of monster.

• View post

  thinking I might just go another mars 5 ultra and save the few hundred bucks difference on the Saturn 4 16k, I’m realistically not gonna need the bigger bed size since I tend to only print smaller scale parts and big stuff I do on an FDM printer, plus I know the mars5ultra really well since that’s what I used to use back in Adelaide. I can save the difference and get a really nice stainless steel workbench to stick under the house and then the big issue I had working at my old place (enough room...

• View post

  @shibao@shitposter.world if americans had any backbone they'd be going london ulez bladerunner on that shit but nope

• View post

• View post

  i really do need to upgrade these speakers it really doesn't take much for them to start falling apart at higher volumes

• View post

  god i shouldn't bother trying to get to bed before midnight on a saturday night here if it's a long weekend, shit was going crazy, carcrashes in the back alley behind my house, people screaming and carrying on all night, lmao

• View post

  i need to find a compact little usb-c charger with at least like 30-60w capacity to keep in my handbag hmmm

• View post

  the novelty of airfryer hasn't worn off yet

• View post

  i also need to decide which room is gonna be the 'workshop', hmm, i have a spare bedroom but it's carpeted and i don't really wanna be doing shit that's gonna make a mess there it'll be an absolute right twat to clean up, but i don't really need room audio syncing if i setup a desk in my living room or dining room that said the dining room is probably gonna be the games room/etc. since at my last place the only time i ever sat at the dining room table was with frends...

• View post

  @maid@shitposter.world fucking google 😫

• View post

  i need to buy the other matching L shaped desk for my office so I can make room for another monitor, and also you know retire another folding camp table thats currently holding up my stereo system, my little mini cluster (though that's also waiting on a proper rack), and my other random projects in progress lmao

• View post

  i am glad my old steam controller made the move up here, there's a lot wrong with it as a controller which I'm looking forward to the new one fixing, but it is quite good regardless.

• View post

  i've been through a long period of my life where i'd rather hold my tongue then get bogged down telling idiots they need to shut the fuck up, but now I'm circling back around to the opinion that I need to tell people they're full of horse shit and need to shut the fuck up more often

• View post

  slowly relearning how to be a functioning human being

• View post

  the funny American numbers make my weight loss seem a lot more impressive, I could say I’ve lost 43kg, or I could say I’ve ’nearly lost 100 pounds’

• View post

  i keep coming back to the lenovo x12 detachable as being the device that I probably want but its legit fucking laptop sized in terms of its x/y dimensions, the surface go is the perfect physical size but the device is a pain in the ass to run linux on (well, it's mostly just bluetooth giving me the shits) and it's getting long in the tooth now. on the other hand, i've already plastered the back of my surface go with stickers if i buy a new device then i have to plaster that with stic...