Elektrine lite

← Feed

maketvee

maketvee@leds.social

Posts

  • View post

    This weekend I will show my project MYNDlights at Maker-Faire Hannover. It's an audio-reactive LED mod for an open-source Bluetooth speaker. Check out the GitHub: https://github.com/makeTVee/MYNDlights You will find me at booth 65 (Glashalle). And of course, I will have some other blinky stuff with me... #makerfaire #makerfairehannover

  • View post

    I have some real world measurements for the current consumption of the new V6 WS2812 LEDs from Worldsemi (new revision with DIO, no caps, 3.3V ready). Measured with 570 WS2812B-2020-V6: Current per LED with Brightness 0 (data on): 80uA@5V, 46uA@3.3V Current per LED with data off (only power): 0.75uA@5V, 0.07uA@3.3V These numbers are CRAZY low for WS2812!

  • View post

    @jripley these small sizes are already available for quite some time. Xinglight has 1010, which also works down to 3.3V. but Worldsemi now does it too, and all the other features like the low quiescence current and the universal DIN/DOUT, in small packages give you a great feature package.

  • View post

    Just coming back from Hackaday Europe, where I showed my full RGB keyboard mod for the Supercon communicator badge. Custom front PCB with side emitting addressable LEDs and a custom resin-printed keyboard. Project write-up at hackaday.io, there's also a video with more details: https://hackaday.io/project/205750-communicator-badge-full-rgb-keyboard?mc_cid=c100339f64&mc_eid=d5c71569fd Thanks everyone for the great feedback, it was an amazing event! #hackadayeurope #LEDs

  • View post

    Getting ready for Maker Faire Hannover this weekend. Search for the blinky hat and stop by. #MakerFaire #MakerFaireHannover #MFH2025

  • View post

    @chipperdoodles Anwaar campaign at @crowdsupply is live! https://www.crowdsupply.com/chipperdoodles-chippydootles/anwaar So if you back it, you can get a free Caffeine faceplate next time meeting me at a con. So excited that it finally starts!

  • View post

    Here another Anwaar faceplate project. A Bosch BMP581 barometric pressure sensor combined with 12 charlieplexed LEDs. Showing a right or left rotating animation when barometric pressure changes. Really fun in elevators and escalators. Checkout @chipperdoodles @crowdsupply Anwaar campaign: https://www.crowdsupply.com/chipperdoodles-chippydootles/anwaar

  • View post

    Short video of my LED project I brought to #39c3. 882 addressable LEDs arranged in a custom girih pattern and controlled by a @wizard Pixelblaze.

  • View post

    I made an LED hat by weaving LED pebble strings with poly rattan. Pure braiding, no glue involved. 475 LEDs in total, controlled by a @wizard Pixelblaze. More pictures 👇🧵