← Feed
24 fps was the capture rate of old film cameras. The reason for that is because of how sound was stored on the edge of celluloid tape. Because of how the sound waves where imprinted on the tape, the max fidelity was at sample rate of at most 10,000 Hz per 18inches of tape. So, 18 inches of tape has to move through the projector and sound head every second.
Consider a 35mm film reel which was popular at the same time. On a 35mm reel, the height of a single frame is about 19mm. So we have 18 inches (457mm) going across the projector screen, which shows a new frame of film every 19mm. That tells us the frame rate: 457/19 = 24.
And that is why films run at 24 fps. Because it was the natural result of technical constraints when sound started being added to film. This is why older silent movies could use lower frame rates. Super 8 cameras recorded at 18fps because they could get away with it, but once Sound Super 8 hit the scene, it got brought back up to 24fps for much the same reasoning as the 1930s had with 35mm film.
Replies (1)
-
But film projectors, even in the late silent era, didn’t just flash the image once per frame. They had two or three bladed shutters so the image on screen would actually flash 48 to 72 times per second even though the film frame was only advancing 24 times per second. The whole point of the extra shutter flashes was to push the flickering of the light on screen above the flicker fusion threshold of your eye where you are able to differentiate between individual flashes of light. For most people, it’s about 50-90 Hz in the center of their field of vision.
Strangely enough, the flicker fusion threshold in the center of your vision is lower than at the edges, which is why you can usually notice the blinking of LED headlights more easily in your peripheral vision than when you’re looking straight at them.
Open ##5477169