2026-11-08 09:04 UTC
Replies (18)
-
@hendrik@palaver.p3x.de 2026-11-08 09:09
Depends on what you’re trying to accomplish. Installing a Linux distribution and using it for everyday tasks should be fairly easy. It’s just pressing “Continue” Buttons a bunch of times for me.
-
@Ithral@lemmy.blahaj.zone 2026-11-08 09:10
That’s not usually what happens, you should get an installer that’s a gui, and it should give you a gui, something went wrong with your installation. Without more details I can’t say what happened for sure though
-
@groche@lemmy.rochegmr.com 2026-11-08 09:11
Must be as easy as windows, but in windows the easy way to fix a big problem is install again, un linux you can reinstall or… Fix with commands. Probably in your case you need to write commands because something go wrong with the installation, maybe you did something wrong, or maybe Ubuntu read something in a bad way and make a mistake installing Ubuntu. Is impossible to know if you don’t share the exact error message.
-
@CameronDev@programming.dev 2026-11-08 09:17
Linux is a spectrum, from super hard to very easy. Sounds like you hit a not-easy one. If you want an easy time, stick with the major distros (Fedora, Ubuntu, etc), and avoid any complex setups. Use that for a while to get familiarity, and then build up from there.
-
@allanon71@lemmy.world 2026-11-08 09:21
I suggest you to use a system backup software like TimeShift before you apply updates or install possible critical software. I do a manual backup before every system update 🙂
-
@anamethatisnt@sopuli.xyz 2026-11-08 09:22
It’s different, which sometimes translates to harder. It doesn’t work the same as Windows which means that some of your hard earned knowledge of Windows is wasted and some is actually coming back to bite you as you approach a task the wrong way. I use Fedora 45 KDE as an example of how Linux might have hidden steps that isn’t mentioned straight away: An example of how easy it can seem to setup Fedora 45: docs.fedoraproject.org/en-US/…/install_fedora/ Things that guide conveniently forgets to mention - rpmfusion, ffmpeg and nvidia: rpmfusion.org/EnablingRpmFusionDuringFedoraInstal… rpmfusion.org/Configuration rpmfusion.org/Howto/Multimedia rpmfusion.org/Howto/NVIDIA Use the Discover store to make it easy to find and install software if you prefer gui over terminals: docs.fedoraproject.org/en-US/…/appinstallation/ To ensure that an app installation works well in Linux you should always try to use the official repositories, flatpaks, docker or appimages. Downloading an installation file (.deb/.rpm) from the developers github is not the normal way to install software, when you use a repository (or alternate methods like flatpaks, docker and appimages) you save yourself a lot of headaches when it comes to updating your software and lowers the risk of “dependency hell” where different software want different versions of the same libraries. To get Multimedia and Nvidia gpus to work properly you want to use rpmfusion to install the drivers. Never install the drivers directly from Nvidia, it will only come back to haunt you with weird errors, bugs and problems and is a common trap for former Windows users. The guides aren’t difficult, but the main guide forgets to mention the extra steps needed that most users want to do.
-
@dusk@piefed.social 2026-11-08 09:25
“i asked chatgpt” microslop is for you
-
@LewdLemon@sh.itjust.works 2026-11-08 09:27
Your install was probably fine. But odds are you chose a (somewhat) manual installation and installed Grub (the bootloader) to the wrong device. If you’re up for a retry: go the fully-automatic route with the installer. You can try it in a VM first. Just set up VirtualBox on your Windows machine and install Kubuntu to a virtual disk. That way, you can figure out what may have gone wrong. And if shit hits the fan again: you still have a functional operating system, reset the VM and go again.
-
@NewNewAugustEast@lemmy.zip 2026-11-08 09:33
Linux is not hard to use. Windows is a much bigger pain in the ass. Don’t ask chatgpt about anything, that is always a bad idea. Give Fedora a try, I would avoid Ubuntu and the derivatives.
-
@IEatDaFeesh@lemmy.world 2026-11-08 09:53
It’s tough at the start when you know nothing.
-
@MisterFred@reddthat.com 2026-11-08 10:15
Linux Mint is your answrr. Any flavor should work
-
@racketlauncher831@lemmy.ml 2026-11-08 10:34
It’s your beginning; you knew nothing. You were judging the difficulty of using the system by just the boot screen, it seems. You probably had difficulty following the documentation. The problem you’ve encountered is an easy one to fix. Even if you are fond of AI, try providing it with more context next time. It could give you a fix. Try reduce your AI usage. It’s not good for you. Read more. Follow the instructions. Documentation is supposed to be helpful.
-
@wltr@discuss.tchncs.de 2026-11-08 11:07
Kubuntu gives me some 2000s vibes when I did try it too, off the disks they were sending me for free. (Thanks for that, Canonical.) Save yourself some time and just use Fedora instead. I’m seriously surprised someone still tries Kubuntu in 2026, and that it’s still alive.
-
@LightDelaBlue@jlai.lu 2026-11-08 11:27
i mean if you need caht gpt for fix anything… i dnt know kubuntu . i use mint regularly no issue on a thinkpad. i have used the comand lines only for get my minecraft and gmod server running. now i double click a script.
-
@ChristerMLB@piefed.social 2026-11-08 12:44
You were just unlucky. This doesn’t usually happen. As for the broader question: it depends on what you want to do. If you’re looking to do simple office stuff and web browsing, Linux is pretty much exactly like Windows and Mac OS (except you can’t really use the desktop version of Microsoft Office). Some things are easier – e.g. you can get most apps from Flathub or the included software manager, and the system will take care of keeping them up to date using the same update manager as the OS. Most customization is also easier on Linux, since more of it is built in. Some things are harder – e.g. regardless of how obscure the app, it will usually install the same way in Windows: you download an installer and run it. On Linux this can get very complicated with smaller and more obscure apps – to the point where you might have to e.g. set up a container with a specific distro, install older versions of dependencies in that container, modify a makefile, compile from source, and then edit some configuration files manually – all to do what you might accomplish by just running an installer in Windows. …but that’s unusual. It is an argument for testing out Linux somehow before committing fully to it (e.g. by dualbooting or running it in a VM) – just to see if you can get your vital software (or good alternatives) running.
-
@JTode@lemmy.world 2026-11-08 13:42
Encryption is complex stuff; if you had a problem, it was with that. It sounds to me like you’re very ready to use Kubuntu, but maybe need some mentoring for encryption, if that is important to you. Very easy to mess that up if the complex fixes are too much at the moment. Note: at the moment. You learn as you go.
-
@Eat_Your_Paisley@lemmy.world 2026-11-08 15:07
Well if ChatGPT can’t figure it out then its for sure too hard
-
@XiJinpingStanAccount@lemmy.ml 2026-11-08 16:22
You didn’t give enough info for me to know what happened but generally imo Windows is harder than Linux. Full disk encryption really isn’t needed for most people. What you should do is HOME encryption. Or have a 2nd partition on your ssd that you keep sensetive things in and is encrypted and you keep that unmounted when not using it.